Robotic Knee Replacement versus Classical Prosthesis: How Does the Process Work?
What is the difference between robotic knee replacement and traditional (classical) knee replacement, how does the robotic system plan the surgical procedure, at which stages is it used, who can have it applied, and how does the recovery progress: a claims-free patient information guide focused on process and mechanism.
Dr. Atakan Güvendiren
Orthopaedics and Traumatology, Istanbul
{ AI, initial information }
onlineLet's discuss prosthesis surgery
AI answers do not replace a medical diagnosis.
This conversation is recorded and read by our clinic team and our website provider DijitalPi so we can help you better. Details: Privacy Notice.
Robotic knee replacement is a surgical method in which the worn joint surfaces of the knee are replaced with an artificial prosthesis, and the planning and bone preparation stages are carried out with the assistance of a computer-supported system. The fundamental technical difference from classical (traditional) knee replacement is the basis on which bone cuts are made and what guidance is used
Robotic knee replacement is a surgical method in which the worn joint surfaces of the knee are replaced with an artificial prosthesis, and the planning and bone preparation stages are carried out with the assistance of a computer-supported system. The fundamental technical difference from classical (traditional) knee replacement is the basis on which bone cuts are made and what guidance is used; in other words, how the procedure is planned.
Summary: Robotic knee replacement and conventional knee replacement are two different processes serving the same goal (replacing a worn joint with an artificial prosthesis). In the conventional method, the surgeon determines bone cuts using mechanical guides and surgical experience; in the robotic method, a three-dimensional model of the knee is created and the system provides guidance aimed at adhering to this plan during bone preparation. Robotic systems are not uniform: some are based on preoperative computed tomography (CT) or MRI images, whilst others map bone surfaces intraoperatively without imaging; the tool used may be a robotic arm or a handheld device. Scientific evidence on whether robotic systems demonstrably improve clinical outcomes remains mixed, and findings vary depending on the system used; therefore, the appropriate method is determined based on the patient, the joint, and the surgeon's assessment. The sections below explain the differences, stages and recovery period of the two processes for information purposes.
What is Robotic Knee Replacement?
Robotic knee replacement is a total knee replacement procedure performed with the aid of a computer-assisted system. The system does not make independent decisions; the surgical plan is prepared by the surgeon and the procedure is carried out under the surgeon's supervision. The system's operation varies according to its type: passive systems provide only guidance information, semi-active systems aim to prevent straying beyond planned boundaries, and active systems can execute planned bone cuts under surgeon supervision. Decision-making and responsibility remain with the orthopaedic and trauma surgeon at every stage.
The term "robotic system" is not the name of a single device, but the collective name for a family of different technologies working in different ways. Systems in this family differ along two axes: where the planning information comes from (preoperative CT/MRI images or three-dimensional surface mapping performed without imaging during surgery) and the type of tool in the surgeon's hands (robotic arm or handheld device). For this reason, the details of the steps described below vary depending on the system used in the centre.
Knee replacement is a joint surgery in which severely worn knee cartilage and bone surfaces caused by osteoarthritis (gonarthrosis), rheumatological diseases or trauma are replaced with an artificial prosthesis. The robotic system is an additional support layer added to the planning and bone preparation stages of this procedure; the aim of the surgery is the same as with the conventional method.
How is Conventional Knee Replacement Performed?
In conventional knee replacement, the surgeon determines bone cuts based on mechanical cutting guides, anatomical landmarks and their own surgical experience. X-ray measurements and guides placed by hand during surgery guide the preparation of surfaces where the prosthesis will sit. The method is a well-established standard that has been applied for decades and extensively studied.
The conventional method process typically consists of the following stages:
- Planning of prosthesis type and size through preoperative X-ray and clinical assessment
- Preparation of worn cartilage and bone surfaces with mechanical guides after surgical incision
- Verification of limb alignment (axis) and ligament balance using trial prostheses
- Insertion of the permanent prosthesis and adjustment of soft tissue balance
In this process, the surgeon's experience and intraoperative assessment are decisive. The conventional method is an established approach used for a long time and can be applied in centres without a robotic system; like any surgical procedure, outcomes vary from patient to patient.
How Does the Robotic System Process Work?
In robotic knee replacement, the process begins with creating a three-dimensional model of the knee. Where this model comes from varies depending on the system used: in image-based systems, preoperative computed tomography (CT) or MRI images are used; in image-free systems, no additional imaging is performed and the model is created during surgery by detailed mapping of bone surfaces. The surgeon plans the prosthesis position and bone cuts on this model; during surgery, the system provides guidance aimed at supporting the surgeon's adherence to this plan.
The key elements of the robotic surgical process are as follows (details vary depending on the system):
- Three-dimensional planning: A model of the knee is created and prosthesis placement is planned in the virtual environment. The model is obtained from preoperative images or from intraoperative mapping, depending on the system.
- Guidance aimed at adhering to the plan: In some systems, a robotic arm aims to constrain when the surgical tool preparing the bone reaches the planned boundary (haptic feedback); in other systems, a handheld device applies a similar limit by pulling back or stopping when the cutting tip goes beyond the plan. The aim is to reduce deviation from the plan.
- Navigation feedback: In some systems with this feature, limb alignment and ligament balance can be monitored with numerical data during surgery; not every platform provides ligament balance measurement or boundary control.
The common aim of these steps is to transfer the predetermined plan to bone preparation; the extent to which the intended outcome is achieved varies depending on the patient, the joint, and the system used. Nevertheless, the robotic system is an aid; the suitability of the prosthesis, ligament balance and final decisions depend on the surgeon's assessment.
Key Differences Between Robotic and Conventional Prostheses
The fundamental technical difference between the two methods lies in how the process is planned and executed. The table below summarises robotic and conventional knee replacement processes comparatively. The table is not a ranking of superiority, but a map of process differences; which method is more appropriate depends on the patient, the joint, and the system used in the centre.
| Process element | Conventional knee replacement | Robotic knee replacement (varies by system) |
|---|---|---|
| Source of planning information | X-ray measurements and clinical assessment | Preoperative CT/MRI images or image-free surface mapping during surgery |
| Bone cutting guidance | Mechanical cutting guides + surgeon experience | Robotic arm or handheld device + plan-adhering boundary/feedback |
| Alignment monitoring | Trial prostheses, anatomical references and measurement-verification steps performed during surgery | Monitoring with navigation data provided by the system |
| Practitioner | Orthopaedic and trauma surgeon | Orthopaedic and trauma surgeon (system as aid) |
| Feasibility | In centres with appropriate team, infrastructure and patient selection | In centres with appropriate team, infrastructure and patient selection, as well as access to a robotic system |
| Implant selection | Prosthetic options offered by the centre | Some systems are compatible only with certain implants; prosthetic options may be limited to the system |
The distinction in the table does not mean one method is better than the other. In the classical approach, alignment and ligament balance are not left to chance: mechanical cutting guides, anatomical reference points, trial implants and intraoperative measurement-verification steps ensure control. Both methods achieve the same control using different tools; which tool is more appropriate for which patient depends on the surgeon's assessment.
As can be seen, the robotic system does not replace classical surgery; it adds an additional technology layer to the planning and bone preparation steps. The purpose of the prostheses used and healing principles are largely similar in both methods. However, the brand or model of the prosthesis may not always be the same: because some robotic platforms are designed to work only with certain implants, when the robotic method is chosen, implant options may be limited to products compatible with that system. This detail is patient-specific and is discussed with the doctor during the pre-operative consultation.
Does Robotic Technology Produce Better Results?
Whether robotic systems produce significantly better clinical outcomes compared to the classical method remains a topic of debate in current scientific literature. Some studies report more consistent prosthesis positioning with the robotic method, whilst others have found no meaningful difference between the two methods in terms of pain, range of motion and long-term function. The evidence is therefore mixed.
An important reason for this uncertainty is that systems falling under the "robotic" heading operate differently from one another. Recent systematic reviews pooling randomised controlled trials have reported differences in certain measures in robot-assisted surgery; however, they noted that results vary between subgroups, some knee scores showed no meaningful difference between the two methods, and findings differ depending on the system used and centre conditions. Most studies included in these reviews fell into the "some concerns" or "high risk" category for bias; consequently, the confidence level of the current evidence is limited. With regard to implant survival without revision, the classical method has been reported to be non-inferior to the robotic method. Long-term superiority has not yet been demonstrated; peer-reviewed publications state that longer-term data are needed on this topic. In short, a finding reported for one system cannot be generalised to all robotic systems.
This uncertainty carries an important message for patients: the word "robotic" alone does not guarantee a better outcome. Many factors determine the success of knee replacement independently of the method: correct planning of the prosthesis with appropriate indication, surgeon experience, patient's bone quality, weight, activity level and regular follow-up after surgery are paramount. Which method is suitable for you is determined by the surgeon's assessment following examination and imaging.
Who Is Suitable for Robotic Knee Replacement?
Robotic knee replacement is generally considered for the same patient group as classical knee replacement, that is, patients with advanced knee osteoarthritis who have not responded adequately to conservative treatments (physiotherapy, exercise, weight management, and injections if necessary). Surgery comes into consideration when pain and loss of function persist despite appropriate non-surgical options and significantly limit daily life; expected benefit, potential risks and patient preference are weighed together. In other words, it is not a necessity or an automatic "last resort" but a decision made jointly.
The applicability of the robotic method also depends on technical conditions:
- The procedure must be performed at a centre with appropriate staff and infrastructure, as well as a robotic system.
- In image-based systems, pre-operative CT or MRI represents an additional imaging step for the patient. In systems using CT, this step involves additional radiation exposure. Image-free systems do not require such additional imaging.
Regardless of the method, certain conditions directly affect the timing of elective (planned) prosthetic surgery:
- Active infection: If there is an ongoing infection in the joint or elsewhere in the body, planned prosthetic surgery is usually postponed until the infection is treated. The risk of the prosthesis becoming infected if placed in the presence of infection is the main reason for this delay.
- Insufficient bone quality: If the bone stock where the prosthesis will be placed is severely depleted, the surgical plan may change; what constitutes "insufficient" bone is not defined by a single threshold but is determined by joint assessment of imaging and clinical findings.
- In addition, uncontrolled concomitant medical conditions and impaired skin integrity can also affect the timing of surgery.
As with every patient, the choice between robotic and classical method is determined by individual assessment. General criteria for knee replacement candidates are set out on the robotic knee replacement information page. Similar robotic applications have been developed for the hip joint, and hip replacement procedures are evaluated separately within their own context.
How Does Recovery Progress?
Whether performed with robotic or classical method, the basic principles of recovery after knee replacement are largely similar. In both methods, pain and swelling control, controlled movement and a physiotherapy programme form the foundation of recovery in the early period. Many patients can stand with support on the first day after surgery with medical approval; complete recovery is a process lasting weeks to months. These timescales are an average framework; outcomes and recovery speed vary from person to person.
The general course of the recovery period is as follows:
- First days: Hospital pain management, clot (thrombosis) prevention and supported first steps
- First weeks: Gradual walking with walker/crutch support, regular physiotherapy
- First months: Increase in knee range of motion and muscle strength, gradual return to daily activities
The robotic system alone does not determine the speed of recovery. Although some studies have reported differences in early pain or function, these findings are inconsistent and the long-term benefit is uncertain. The course of recovery is determined by the patient's general health, muscle strength, adherence to the exercise programme given only by your surgeon or physiotherapist, and regular follow-up with your physician. Exercises you choose yourself or find on the internet do not replace this programme. Compliance with physiotherapy is one of the factors affecting the outcome; results vary from person to person.
Risks and Precautions
Knee replacement, whether using robotic or conventional method, carries certain risks like any surgical procedure. The robotic system does not eliminate these risks. Possible complications include infection, blood clots in the leg veins (deep vein thrombosis and potentially pulmonary embolism), bleeding, nerve or blood vessel injury, loosening of the implant over time, and the possibility of revision (replacement) surgery in the future. These risks are explained in detail to the patient before surgery.
The robotic method has some additional specific considerations not found in the conventional method:
- Additional imaging and radiation: In systems using CT-based planning, an additional CT scan is obtained before surgery; this means additional radiation exposure. Image-free systems do not have this step.
- Tracking pins: In many systems, temporary tracking (tracker) pins are placed into the bone. Infection may occur at the site where these pins are applied, or rarely, fracture from pin displacement.
- Technical failure and registration error: If the system malfunctions or there is an error during the anatomical registration phase, the surgery can be completed by reverting to the conventional method.
- Operating time: Due to planning, registration, and setup steps, the operating time may be longer in some cases; this duration varies with the team's experience and the system used.
The following symptoms in the post-operative period should be taken seriously. Any one of the findings listed below is sufficient on its own; all symptoms are not expected to occur together.
- Call 112 immediately / go to emergency: Sudden shortness of breath, sudden chest pain or coughing up blood; confusion, fainting or speech disturbance; rapidly increasing disproportionate pain in the operated leg that does not respond to painkillers, along with tense-hard swelling, numbness, tingling, inability to move toes, or the foot being cold, pale or bluish; deformity of the leg after a fall, sudden severe pain, or complete inability to bear weight on the leg. These signs may indicate pulmonary embolism, compartment syndrome, or vascular-nerve problems, and time must not be wasted.
- Get emergency medical evaluation the same day (do not wait until tomorrow): New or increasing swelling in the calf, ankle or foot; increasing pain in the calf; tenderness or redness below or above the knee (should be evaluated for clot/DVT). In these cases contact your surgical team the same day; if you cannot reach your team, go to emergency without waiting until tomorrow. Also: discharge from the wound site; increasing redness, tenderness or swelling around the wound; chills; prolonged fever (over 37.8 °C / 100 °F when measured by mouth); knee pain that increases both with movement and at rest; stitches opening. Important: prosthetic infection can occur without fever; any of these findings should be evaluated even if you do not have a fever.
These warning signs apply to both robotic and conventional knee replacement. If you have any doubt, it is important to contact your physician without delay.
References
- EFORT Open Reviews (2021), "The current state of robotics in total knee arthroplasty": distinction between image-based (CT/MR) and image-free robotic systems, difference between robotic arm and handheld device, limitations of long-term outcome data.
- Journal of Clinical Medicine (2025), "Comparative Efficacy and Precision of Robot-Assisted vs. Conventional Total Knee Arthroplasty: A Systematic Review and Meta-Analysis of Randomized Controlled Trials": a systematic review combining randomised controlled trials; findings show results vary by subgroup and system used, with inconsistent benefit. (Patient numbers reported within the article were inconsistent internally, so numbers are not used in this content.)
- American Academy of Orthopaedic Surgeons, OrthoInfo, "Total Knee Replacement": post-operative clot and infection warning signs, criteria for consulting a doctor.
This information is for educational purposes and does not replace diagnosis and treatment. Please consult your doctor about your symptoms.
Frequently Asked Questions
What is robotic knee replacement surgery?
Robotic knee replacement surgery is a procedure in which a worn knee joint is replaced with an artificial prosthesis, performed with the guidance of a computer-assisted system. The system does not make independent decisions; the plan is prepared by the surgeon and implementation is carried out under the surgeon's supervision. The operation of these systems varies according to whether they are passive, semi-active or active. Some of these systems are based on pre-operative CT/MR imaging, while others perform image-free mapping during surgery; the instrument used may be a robotic arm or handheld device. Decision-making and implementation responsibility lies with the orthopaedic surgeon.
What is the fundamental difference between robotic knee replacement and conventional replacement?
The fundamental technical difference is in the process. In the conventional method, the surgeon determines bone cuts using mechanical guides and experience. In the robotic method, a plan is created from a three-dimensional model of the knee, and the system provides constraints aimed at maintaining adherence to this plan. The surgeon's goal is the same in both methods; however, some robotic platforms are compatible only with certain implants, so prosthesis options may be limited by the system. Evidence for clinical superiority is mixed and varies depending on the system used.
Does the national health insurance cover robotic knee replacement surgery?
The reimbursement conditions for knee replacement surgery may vary depending on the patient's situation, the facility where the procedure is performed, and current regulations. The use of a robotic system may involve additional conditions at some centres. For this reason, it is best to consult the relevant healthcare institution and your social security department regarding reimbursement and coverage status; this content does not include fee information.
Can robotic knee replacement be performed on everyone?
Robotic knee replacement generally has the same indications as classical knee replacement; that is, it is considered in patients with advanced knee osteoarthritis that does not respond to conservative treatments. Feasibility also depends on the availability of a centre with appropriate team, infrastructure and robotic system. In situations such as active infection, planned surgery is typically postponed regardless of method until the infection has been treated. The method choice is determined individually following physician evaluation after examination and imaging; outcomes vary from person to person.
Schedule an Appointment
Your information will be sent to Dr. Atakan Güvendiren's clinic. A response will be provided within 24 hours.